40-Foot Container Chassis For Sale
TransWorld Equipment offers a 40-foot chassis with radial tires and LED lights, specifically a 40-foot gooseneck tandem chassis and tri-axle configuration also available.
TransWorld Equipment is a leading intermodal chassis supplier and has been servicing various industries across North America for over 25 years. We work directly with our customers, and can even customize our 40-foot chassis to meet their specific requirements and needs.
Specifications
Dimensions
| Overall Length |
40′-8″ (excluded rear bumper) |
| Fifth Wheel Height |
48″ |
| Rear Deck Height |
48″ +1″ |
| Kingpin Location |
30″ (from rear face of front bolster) |
| Axle Spread |
49″ |
| Tandem Location |
54″ (from rear face of rear bolster) |
| Tare Weight |
6,700 lbs |
| Gross Vehicle Weight Rating |
73,900 lbs |
Function
Carries one (1) 40′ HC ISO Container. Meets all TOFC, AAR, DOT, FMVSS, ISO, ANSI, SAE and TTMA
General
| Material |
High strength GR50 steel. |
| Painting |
Valspar or Kansai Zinc-rich primer and Urethane based topcoat. |
| Main Beam |
W12@19lb/ft hot-rolled H-beam, ASTM A572 Grade 50. |
| Crossmember |
3/16″ thick x 3″ wide x 9″ height channel with gussets on top. |
| GN Beam |
5-1/4″ x 4″ fabricated H-beam, 1/2″ thick flange and 1/4″ thick web. |
| Upper Coupler |
5/16″ thick w/2″ dia. drain holes, reinforced by 5/16″ thick angle type kingpin supporters. 2″ AAR certificated kingpin. |
| Front Bolster |
8″ wide x 10″ high, 1/4″ thick open section, with 3-1/2″ chamfer in full length for gathering container in operation. |
| Rear Bolster |
8″ wide x 3/8″ thick tip plate with 6 7/8″ wide x 7 1/2″ deep x 1/4″ thick “U” channel. |
| Rear Bumper |
4″ x 4″ square type step bar supported by H type posts. |
| Front Locking Pin |
Schulz FB99HL or Buffers 1213. |
| Rear Twist Lock |
Schulz F77ANS or Buffers 1257. |
| Landing Gear |
50,000 lbs capacity, 2-speed 17″ travel, low profile sand shoe. |
| Suspension |
Hutchens spring 354-00. |
| Axles |
5″ round axles with 22,500 lb capacity, 71 1/2″ track, 28 spline, 6″ automatic slack adjusters. 16 1/2″ x 7″ Q Brake. |
| Lubricant |
Stemco or SKF seal, shell LX2 grease lubricant with metal hubcap. |
| Hub & Drum |
Heavy duty 16 1/2″ x 7″ cast steel brake drums with 5 spoke cast wheels. |
| Rims |
Centurion or Sunrise 7.5 x 20 2-piece demountable tube type. |
| Tires |
10.00-20 tube type, 14 ply. |
| Brake System |
Wabco or Haldex 2 S/1M ABS brake system, spring brake priority Phillips 12-008/12-006 gladhand and Haldex type 3030 2.5″ stroke brake chamber. |
| Electrical |
12 volt lightning system with Phillips modular wiring harness. |
| Misc |
Marking, Conspicuity tape, Document holder, 24 x 30 black rubber mudflap. |
*Please note: Specifications, such as tare weights, components and gross vehicle weights, shown are for general illustration purposes. All new chassis can be customized to your specific requirements.
This website and its content are copyright of Transworld Equipment – © Transworld Equipment. All rights reserved. 
We accept all major credit cards.
