New Combo Chassis From TransWorld
TransWorld Equipment is proud to offer a combo chassis for sale. This container chassis brings versatility to your business. It can handle one heavy 20-foot container, one 40-foot container, or two empty 20-foot containers.
Our combo trailer is available in both tri-axle and spread-axle configurations. We also offer a unit to handle 45-foot and 48-foot containers.
As with all of our intermodal equipment, our combo chassis inventory meets all DOT safety regulations. Furthermore, all new chassis options can be customized to fit your specific needs.
Specifications
Dimensions
| Overall Length |
46 1/2″ (excluding rear bumper) |
| Overall Width |
96″ |
| Fifth Wheel Height |
46 1/2″ |
| Rear Deck Height |
47″ |
| Kingpin Location |
17 1/2″ |
| Tri-Axle Spread |
61″ |
| Tri-Axle Location |
30″ (from rear end to tri-axle center) |
| Tare Weight |
10,600 lbs (+3%) |
| Gross Vehicle Weight Rating |
77,000 lbs for 20′ Container |
| Frame Rating |
85,000 lbs for 40′ Container |
Function
Equipped to handle one (1) 20′ loaded, one (1) 40′ HC loaded ISO Container. Option: Two empty 20′ Containers. Meets all TOFC, AAR, DOT, FMVSS, ISO, ANSI, SAE and TTMA specifications.
General
| Material |
130,000 psi steel for Main Frame Flanges, GR50 or GR80 steel for all others. |
| Painting |
Zinc-rich primer and Urethane based topcoat. |
| Main Beam |
16″ x 5″ fabricated I-beam with high strength flanges, 6″ high for GN rail. |
| Slider Beam |
14″ high x 5″ wide fabricated I-beam, 2 pin locking system. |
| Crossmember |
Fabricated channel type not less than 1/4″ thick. |
| Upper Coupler |
1/4″ thick w/2″ dia drain holes, reinforced by 5/16″ thick angle type kingpin 2″ AAR certificated kingpin. |
| Rear Bumper |
4″ x 4″ square type step bar supported by “H” type posts. |
| Twist Locks |
Compact retractable and drop-in twist locks. |
| Landing Gear |
50,000 lbs capacity, 2-speed 17″ travel, low profile sand shoe. |
| Suspension |
Hutchens mechanism tri-axle suspension w/spring 360-00 |
| Axle |
5″ round axles with 22,500lb capacity, 71-1/2″ track width, 16 1/2″ x 7″ Q Brake 28 spline, 6″ automatic slack adjusters. |
| Lubricant |
Stemco oil seal. Shell Spirex S75W-90 oil lubricant. |
| Hub & Drum |
10 stud hub piloted hubs with outboard mounting cast steel drum. |
| Rims |
22.5 x 8.25 hub-piloted wheels. |
| Tires |
255/70R22.5, 16 ply load range H. |
| Brake System |
Wabco 4S/2M ABS brake system, spring brake priority. Phillips 12-008/12-006 gladhand and Haldex type 3030 2.5″ stroke brake chamber. |
| Electrical |
Truck-lite 12 volt LED lighting system with Phillips modular wiring harness. |
| Misc |
Marking, Conspicuity tape, Document holder, 18 x 24 black. |
*Please note: Specifications, such as tare weights, components and gross vehicle weights, shown are for general illustration purposes. All new chassis can be customized to your specific requirements.
This website and its content are copyright of Transworld Equipment – © Transworld Equipment. All rights reserved. 
We accept all major credit cards.
