40ft Gooseneck Tandem Axle Container Chassis
|
1. FUNCTION
|
|
Carries one (1) 40' HC ISO Container. Meets all TOFC, AAR, DOT, FMVSS, ISO, ANSI, SAE and TTMA
|
|
2. GENERAL
|
|
Overall Length
|
40'-8" (excluded rear bumper)
|
|
Fifth Wheel Height
|
48"
|
|
Rear Deck Height
|
48" +1"
|
| Kingpin Location |
30" (from rear face of front bolster) |
| Axle Spread |
49" |
| Tandem Location |
54" (from rear face of rear bolster) |
| Tare Weight |
6,700 lbs |
| Gross Vehicle Weight Rating |
73,900 lbs |
| 3. STEEL STRUCTURE & COMPONENTS |
|
Material
|
High strength GR50 steel. |
| Painting |
Valspar or Kansai Zinc-rich primer and Urethane based topcoat. |
| Main Beam |
W12@19lb/ft hot-rolled H-beam, ASTM A572 Grade 50. |
| Crossmember |
3/16" thick x 3" wide x 9" height channel with gussets on top. |
| GN Beam |
5-1/4" x 4" fabricated H-beam, 1/2" thick flange and 1/4" thick web. |
| Upper Coupler |
5/16" thick w/2" dia. drain holes, reinforced by 5/16" thick angle type kingpin supporters. 2" AAR certificated kingpin. |
| Front Bolster |
8" wide x 10" high, 1/4" thick open section, with 3-1/2" chamfer in full length for gathering container in operation. |
|
Rear Bolster
|
8" wide x 3/8" thick tip plate with 6 7/8" wide x 7 1/2" deep x 1/4" thick "U" channel. |
| Rear Bumper |
4" x 4" square type step bar supported by H type posts. |
| Front Locking Pin |
Schulz FB99HL or Buffers 1213. |
| Rear Twist Lock |
Schulz F77ANS or Buffers 1257. |
| Landing Gear |
50,000 lbs capacity, 2-speed 17" travel, low profile sand shoe. |
| Suspension |
Hutchens spring 354-00. |
| Axles |
5" round axles with 22,500 lb capacity, 71 1/2" track, 28 spline, 6" automatic slack adjusters. 16 1/2" x 7" Q Brake. |
| Lubricant |
Stemco or SKF seal, shell LX2 grease lubricant with metal hubcap. |
|
Hub & Drum
|
Heavy duty 16 1/2" x 7" cast steel brake drums with 5 spoke cast wheels.
|
|
Rims
|
Centurion or Sunrise 7.5 x 20 2-piece demountable tube type.
|
|
Tires
|
10.00-20 tube type, 14 ply.
|
|
Brake System
|
Wabco or Haldex 2 S/1M ABS brake system, spring brake priority Phillips 12-008/12-006 gladhand and Haldex type 3030 2.5" stroke brake chamber.
|
|
Electrical
|
12 volt lightning system with Phillips modular wiring harness.
|
|
Misc
|
Marking, Conspicuity tape, Document holder, 24 x 30 black rubber mudflap.
|
|
|